FURSE ESP Signal SPD Computer networks up to Cat-5e and PoE
Product Name：FURSE ESP Signal SPD Computer networks up to Cat-5e and PoE
Product Model：ESP Cat-5,ESP Cat-5e,ESP Cat-5/Gigabit,ESP Cat-5e/Gigabit,
Updated：2010.04.08
Views：2
Computer network protectors for twisted pair Ethernet (10, 100 and 1000baseT) and Power over Ethernet (PoE) networks with Cat-5 or Cat-5e cabling and RJ45 connections 10
Use this protector on network cables that travel between buildings to prevent damage to equipment, e.g. computers, servers, repeaters and hubs
| Product part codes: | |
| ESP Cat-5 | Use to protect up to 100baseT networks with Cat-5 cabling |
| ESP Cat-5e | Use to protect up to 100baseT networks with Cat-5e cabling |
| ESP Cat-5/Gigabit | Use to protect up to 1000baseT networks with Cat-5 cabling |
| ESP Cat-5e/Gigabit | Use to protect up to 1000baseT networks with Cat-5e cabling |
| ESP Cat-5/PoE | Use to protect up to 100baseT Power over Ethernet (PoE) networks |
 |
Suitable for systems signalling on up to eight wires of either shielded or unshielded twisted pair cable |
|
Very low let-through voltage (enhanced protection to BS EN 62305) between all lines - Full Mode protection |
|
Unlike some competing devices, the ESP Cat-5 Series provides effective protection without impairing the system's normal operation |
|
Low capacitance circuitry prevents the start-up signal degradation associated with other types of network protector |
|
Low in-line resistance minimises unnecessary reductions in signal strength to maximise signalling distance |
|
Supplied with short (25cm) Cat-5e UTP cable to enable neat installation |