FURSE ESP Signal SPD Ready boxed for 4 wire twisted pair lines


Product Name：FURSE ESP Signal SPD Ready boxed for 4 wire twisted pair lines
Product Model：ESP 06D/BX,ESP 15D/BX,ESP 30D/BX,ESP 50D/BX,ESP 110D/BX,ES
Updated：2010.04.08
Views：2

Based on the versatile ESP D Series and ESP TN , these protectors are ready-boxed to IP66 for use on 2 or 4 wire twisted pair data communication, signal and telephone lines 26

Use these ready-boxed protectors on twisted pair lines in dirty or damp environments

Product part codes:
ESP 06D/BX Use with working voltages of up to 6 volts on 2 wire lines
ESP 15D/BX Use with working voltages of up to 15 volts on 2 wire lines
ESP 30D/BX Use with working voltages of up to 30 volts on 2 wire lines
ESP 50D/BX Use with working voltages of up to 50 volts on 2 wire lines
ESP 110D/BX Use with working voltages of up to 110 volts on 2 wire lines
ESP TN/BX Suitable for Broadband, POTS, dial-up T1/E1, lease line and *DSL telephone applications
ESP 06D/2BX Use with working voltages of up to 6 volts on 4 wire lines
ESP 15D/2BX Use with working voltages of up to 15 volts on 4 wire lines
ESP 30D/2BX Use with working voltages of up to 30 volts on 4 wire lines
ESP 50D/2BX Use with working voltages of up to 50 volts on 4 wire lines
ESP 110D/2BX Use with working voltages of up to 110 volts on 4 wire lines
ESP TN/2BX Suitable for Broadband, POTS, dial-up T1/E1, lease line and *DSL telephone applications

Very low let-through voltage (enhanced protection to BS EN 62305) between all lines - Full Mode protection
Full mode design capable of handling partial lightning currents as well as allowing continual operation of protected equipment
Repeated protection in lightning intense environments
Low in-line resistance minimises unnecessary reductions in signal strength
Ready-boxed to IP66 and supplied ready for flat mounting
ESP TN/2BX is suitable for telecommunication applications in accordance with Telcordia and ANSI Standards