FURSE ESP Signal SPD Telephone lines with LSA-PLUS modules
Product Name：FURSE ESP Signal SPD Telephone lines with LSA-PLUS modules
Product Model：ESP KT1,ESP KT1/PTC,ESP KT2,ESP K10T1,ESP K10T1/PTC,ESP K1
Updated：2010.04.08
Views：2
Single and ten way protectors for PSTN and ISDN phone lines using LSA-PLUS disconnection modules 20
Use on ten line LSA-PLUS disconnection modules to PBX telephone exchanges, ISDN and other telecom equipment with LSA-PLUS disconnection modules
| Product part codes: | |
| ESP KT1 | Use to protect single lines on PSTN and U interface ISDN lines |
| ESP KT1/PTC | Use to protect single lines on PSTN and U interface ISDN lines |
| ESP KT2 | Use on S/T interface ISDN lines |
| ESP K10T1 | Use to protect all ten lines on a disconnection module |
| ESP K10T1/PTC | Use to protect PSTN and U interface ISDN lines |
| ESP K10T2 | Use on S/T interface ISDN lines to protect all ten lines |
| ESP KE10 | Use to earth up to ten ESP KT1/2's and ESP KT1/PTC (per disconnection module) |
 |
Low let-through voltage between all sets of conductors |
|
Very low let-through voltage (enhanced protection to BS EN 62305) between all lines - Full Mode protection |
|
Full mode design capable of handling partial lightning currents as well as allowing continual operation of protected equipment |
|
Under power lines cross conductions /PTC versions offer safe disconnection during fault duration. The unit will then auto reset once the fault has been corrected |
|
At larger installations ESP K10T1/2 and ESP K10T1/PTC provide all in one protection for all ten lines on a standard LSA/PLUS disconnection modules |
|
ESP T1, ESP KT1/PTC , ESP K10T1 and ESP K10T1/PTC are suitable for telecommunication applications in accordance with Telcordia and ANSI Standards |