Three phase extra high maximum surge current capacity
Product Name：Three phase extra high maximum surge current capacity
Product Model：ESP 415 M2,ESP 415 M4,ESP 480 M2,ESP 480 M4
Updated：2010.04.01
Views：2
Protectors with an extra high maximum surge current capacity for three phase mains power supplies 6
Use ESP M2 versions on main distribution panel for buildings with a Class III or IV structural LPS fitted or exposed 3 phase power lines where no LPS is fitted. Use ESP M4 versions on main distribution panel for buildings with a Class I or II LPS fitted
| Product part codes: | |
| ESP 415 M2 | Use on three phase mains supplies of 346-484 volts |
| ESP 415 M4 | Use on three phase mains supplies of 346-484 volts |
| ESP 480 M2 | Use on three phase mains supplies of 402-600 volts |
| ESP 480 M4 | Use on three phase mains supplies of 402-600 volts |
 |
Very low let-through voltage between all sets of conductors (phase to neutral, phase to earth and neutral to earth) |
|
Full mode design capable of handling high energy partial lightning currents as well as allowing continual operation of protected equipment |
|
Innovative multiple thermal disconnect technology, for safe disconnection from faulty or abnormal supplies (without compromising protective performance) |
|
Three way visual indication of protection status |
|
Advanced pre-failure warning so you need never be unprotected |
|
Remote indication facility allows pre-failure warning to be linked to a building management system, buzzer or light |