FURSE ESP Three phase supplies
Product Name：FURSE ESP Three phase supplies
Product Model：ESP 120 M1,ESP 208 M1,ESP 240 M1,ESP 415 M1,ESP 277 M1,ESP
Updated：2010.03.31
Views：2
Protectors for use on three phase mains supplies and power distribution systems 4
Combined Type 1, 2 and 3 tested protector (to BS EN 61643) for use on mains power distribution systems primarily to protect connected electronic equipment from transient overvoltages on the mains supply, e.g. computer, communications or control equipment.
| Product part codes: | |
| ESP 120 M1 | Use on single phase supplies of 90-150 volts |
| ESP 208 M1 | Use on single phase supplies of 156-260 volts |
| ESP 240 M1 | Use on single phase supplies of 200-280 volts |
| ESP 415 M1 | Use on three phase supplies of 346-484 volts |
| ESP 277 M1 | Use on three phase supplies of 232-350 volts |
| ESP 480 M1 | Use on three phase supplies of 402-600 volts |
 |
Very low let-through voltage (enhanced protection to BS EN 62305) between all sets of conductors (phase to neutral, phase to earth, neutral to earth - Full Mode protection). |
|
Provides repeated protection in lightning intense environments |
|
Full mode design capable of handling partial lightning currents as well as allowing continual operation of protected equipment |
|
Innovative multiple thermal disconnect technology for safe disconnection from faulty of abnormal supplies (without compromising protective performance) |
|
Three way visual indication of protection status and advanced pre-failure warning so you need never be unprotected |
|
Remote indication facility allows pre-failure warning to be linked to a building management system, buzzer or light |